Go from a dark colour to a light colour in fewer coats with Transition.
Transition doesn’t have the same adhesion or durability as regular Fusion Mineral Paint as it uses recycled pigments, but it is very cost effective!
For best results use Transition in a sandwich technique between coats of Fusion Mineral Paint. First apply a coat of Fusion Mineral Paint, wait 48 hours, then apply a coat of Transition. Let it dry for 48 hours, then apply your final coat of Fusion Mineral Paint.
Note: Transition is not a primer and DOES NOT seal or block against resin or tannin bleed through, and should be used on surfaces ready and prepped. Be sure to use a Zinsser BIN shellac-based primer for bleed through concerns (oak, mahogany, teak, new pine with knots).
Transition
All Fusion™ products are non-toxic, lead free, virtually odorless and have no volatile organic compounds (VOC) and contain no ammonia or formaldehyde.